Technical Characteristics of Pure Lead Battery

• In pure lead batteries, the positive and negative grids are made of pure metallic lead, without any grid alloys. To solve casting problems of pure lead and improve the mechanical strength of pure lead grid, special technologies and equipments are needed in manufacturing.

  Major technical characteristics of pure lead batteries are as follows:

  （1）Pure lead ingots are first made into lead belts, then stamped into grids.

  （2）Crystal lattices of pure lead grids are extremely compact, and therefore largely improve the corrosion resistance of grids.

  （3）Super-thin plates are adopted in pure lead batteries.

  （4）Except metallic lead, all other high purity materials have adopted high purity materials.

  （5）The manufacturing of pure lead battery is controlled by fully automatic robots. 

Horizontal Placement Plan of Carrier-Grade Battery

• As a newly developed battery, carrier-grade battery possesses brand new appearance design and structural design. To achieve better performance, horizontal placement is adopted in installation. Therefore, we have designed the following new battery rack to realize the fully horizontal placement of the carrier-grade battery.

  48V200/300 Battery Rack: simple, convenient, practical, economical, and space saving. The outgoing lines are on the same side of the battery rack, which is convenient to maintain.

  

  System Assembly Drawing

  

  Assembly Drawing of Battery Rack

  

  Partial Explosion Effect of the Battery Rack

  48V400~1000 Battery Rack: simple, convenient, practical, economical, and space saving. The outgoing lines are on the same side of the battery rack, which is convenient to maintain.

   

  System Assembly Drawing

  

  Explosion Effect of the Battery Rack

  Currently, the carrier-grade battery racks (include horizontal placement racks and vertical placement racks) have been widely applied in China Mobile, China Unicom, China Telecom and China Power, especially in the II level batteries of China Mobile. Customer feedback for our racks is quite favorable.

  Technical Difficulties in the Development of Battery Racks

  Entire-palletdesign for GFM-300 battery rack

  

  Special-shapedmaterials such as supporting plates and protect plates of GFM-500 need to beprocessed with special molds.

  

  Protect plates need to be kept away from the drop direction of leakage, and reinforced with insulation nails.

  

Sacred Sun: Energy Storage System of FCP Lead Carbon Batteries will Assist the Development of Energy Storage Industry

On March 16th, 2015, the second working conference of “13th Five Year Plan” on the development of national energy storage industry was held at Tsinghua University. Experts have fully discussed 7 major topics and 33 subtopics on technologies, development objectives, tasks, and overall arrangement of energy storage industry.

    Aiming at the cost dilemma happened in the scale development of energy storage industry, Sui Yanbo, deputy general manager of Sacred Sun, has indicated that FCP lead carbon batteries could improve the development of energy storage industry with its advanced technology and less cost per kw.h.

    Sacred Sun has brought in advanced FCP lead carbon battery technology from Japanese company Furukawa Battery Co., Ltd. in 2014. Such kind of battery possesses advantages such as superlong service life, better charge acceptance, excellent PSOC property, modularized system design and installation, etc.

    At last, Mr. Sui said that Sacred Sun is willing to cooperate with experts responsible for the major research projects of “13th Five Year Plan” on the development of energy storage industry, and make greater contributions to the energy revolution of our country.

The World is Entering “Aluminum” Battery Era

Recently, ChineseAmerican scientist Dai Hongjie has developed a high- performance aluminum battery which is suitable for commercial applications. Smartphones with such kind of batteries can be fully charged within 1 minute and without capacity loss within 7500 chargedischarge cycles. On the strength of its faster charging, longer service life, and lower cost, it is very possible for aluminum batteries to replace Lithium-ion batteries and alkaline batteries in the future.

    In the past decades, researchers are always trying to develop economical aluminum batteries, but appropriate positive materials and electrolyte materials are too difficult to find.

    In accordance with the report from American’s Science Daily website on April 6, negative electrode (aluminum material), positive electrode (graphite), and electrolyte (ionic liquid) of aluminum battery are placed in a soft bag made of aluminum foil and covered by flexible macromolecules.

     “This newly developed rechargeable aluminum battery is much safer than traditional Li-ion battery. Li-ion battery has the risk of explosion, while aluminum battery is safe on this aspect. In addition, to fully charge a smartphone with Li-ion battery, several hours are needed, while for smartphone with aluminum battery, one minute is enough.”

    Compared with the service life of other aluminum batteries (approximately 100 charge-discharge cycles) and Li-ion batteries (approximately 1000 charge-discharge cycles), the service life of this new aluminum battery (7500 charge-discharge cycles without capacity loss) is really amazing.

    Another distinguishing characteristic of this new aluminum battery is its flexibility, which enables it to be applied on flexible electronic instruments. Cheaper, safer, greener, and more flexible, this aluminum battery is a perfect alternative for traditional alkaline batteries and li-ion batteries.

    The only deficiency of this new aluminum battery is its voltage, which is only half of traditional li-ion batteries. Dai Hongjie planned to improve its voltage and energy density through improving the performance of positive materials.

On April 13th, 2015, Sacred Sun has donated 100,000 RMB for Wu Jiaqi

On April 13th, 2015, Sacred Sun has donated 100,000 RMB for Wu Jiaqi, a 7-years-old child who is suffering from leukemia, to help the girl to recuperate her health.

What’s the classification of battery?

In accordance with electrolyte, batteries can be divided into: alkaline battery, acid battery, neutral battery and organic electrolyte battery.

In accordance with working principle and storage mode, batteries can be divided into primary battery and secondary (storage) battery.

In accordance with positive and negative electrode materials, batteries can be divided into Zinc series battery, Nickel series battery, Lead series battery, Lithium series battery, Manganese dioxide series battery, and Air (oxygen) series battery.

Fns Power Technology Inc.of Sacred Sun Attend MEE 2015

In recently, FnS Power Technology Inc. as the wholly owned subsidiary of Sacred Sun attend Solar Middle East Exhibition 2015 which held in Dubai.
On the exhibition, we launched the full range of economic and efficient system storage solutions from 10W to MW level, become the highlights with “one-stop” new energy storage solution provider. In three days, we received visitors more than 120 batches, which with the intention of visitors more than 70 batch, more than 10 customers expressed will place orders and visit factory.
In the global energy conservation and environmental protection and low carbon economy, Sacred Sun system storage solutions made the energy consumption to find the direction in the Middle East, to enhance their confidence in the development of new energy business.